Samsung t100 to t108 update

[nightyj]

Моля спешно някой ако може да ми помогне да си намеря този биос.Преди бях чел на някой сайт за безплатни мелодии,че може да се ъпдейтне,но можело да се скапе и телефона и затова махнали тази част от страницата някой занели как става или този сайт.

[nightyj]

Nikoj li ne e zaposnat :(

[nightyj]

Ето това е сайта http://www.freepolyringtones.co.uk/ където го имаше този ъпдейт , но още преди година и половина като си го взех тела беше свален , някой дърпал ли го е и знае ли как става . Много ми се иска да си го сложа и да си имам Т 108 или пък Obox firmaware да си слагам игри . Аре някой по запознат да сподели нещо.

Ето малко инфо за собствениците на Т100 :

not too sure if this is any help, you might be able to use Toolbox to access the remote keypad feature and use these codes - be warned though use them at your OWN risk!!! (They may damage your phone :oops: )
Code Result
*2767*2878# WARNING! REMOVE THE SIM FIRST! Custom EEPROM (Electrically Erasable Programmable Read-Only Memory) reset. This code only resets the EEPROM. It doesn’t remove the Service Provider (SP)-lock and doesn’t change the IMEI (International Mobile Equipment Identity) number
*2767*3855# WARNING! REMOVE THE SIM FIRST! Full EEPROM reset. This code resets the EEPROM, removes the SP-lock and also changes the IMEI to 447967-89-400044-0. You must use the program chgimei.exe to restore it
*2767*63342# WARNING! REMOVE THE SIM FIRST! Full media reset. This code resets the ring tones and graphics to the factory state
*2767*927# WARNING! REMOVE THE SIM FIRST! This code resets the WAP (Wireless Application Protocol) to the factory state
*#06# Shows IMEI number
*#0001# Shows RS232 (physical interface) serial communication parameter setup
*#8999*228# Shows battery type, voltage and temperature
*#8999*246# Show the memory capacity
*#8999*268# Enter or change the displayed text during start-up (max. 16 characters)
*#8999*289# Ring tone test, doesn’t work on all FirmWares (FWs)
*#8999*289# Change Alarm Buzzer Frequency, doesn’t work on all FWs
*#8999*324# Shows the network checkout (engineering model)
*#8999*364# Shows the watchdog state
*#8999*377# Shows the software error LOG (wrong display of EEPROM)
*#8999*427# Watchdog signal route setup
*#8999*523# Adjust display contrast; don’t set contrast volume higher then 34
*#8999*544# Shows and let you adjust the Jig detect
*#8999*636# Shows storage capacity
*#8999*638# Shows network information
*#8999*746# Shows the SIM (Subscriber Identity Module) File Size.
ADN= (Abbreviated Dialing Numbers): amount of names and numbers storable on the SIM
EXT1= the amount of numbers storable with more then 20 digits
LND= (Last Dialed Numbers): amount of last numbers that you dialed storable on the SIM
SMS= the amount of SMS storable on the SIM
CBMI= (Cell Broadcast Message Identifier)
PLMN= (Public Land Mobile Network
LP=?
MSISDN= (Mobile Station international ISDN number): the dialing numbers that callers use to reach a mobile subscriber
*#8999*778# Shows SIM card information
*#8999*782# Shows date and alarm clock
*#8999*785# Shows the RTK (Run Time Kernel) errors
*#8999*786# Shows the uptime relative and absolute, last shut down and how long the phone was activated before the last shutdown
*#8999*837# Shows the Samsung hardware version, doesn’t work on all FWs
*8999*842# Executes the vibrate test
*#8999*862# Shows Vocoder Registration
*#8999*872# Shows diagnostics
*#8999*947# Lets you adjust if the phone need to reset on a fatal error
*#8999*999# Shows Last/Chk
*#8999*9266# Shows received channel number and received intensity
*#8999*9999# Shows Firmware version